just managed to get my hands on the full switch (out of the 60 sx) and i am wanting to wire up my fog's using this switch, does anyone have the proper wiring diagram looking left to right (holding the connector with the button on the bottom) i know numbers 1, 2 and 4 i think it is does not have anything wired to them (on the 60s)

also, i have looked at the guide and it describes soldering yet i've managed to get a hold of all the proper connectors so do not want to do any soldering

any help would be greatly accepted

Thanks
Nick

BUMP!!

also would greatly accept a wiring diagram

fog lights have to be wired so they only light up on dip; take a fused lead (thick wire as will carry full current to fog lights) directly off the battery to a 12v relay (maplins) and then to the lights; this relay will be switched by your on/off foglight switch (low current so thin wire) but you will need another relay in the wire going from the foglight switch to the first relay that is operated by dip; alternatively run a wire from the wire going to the dip back to the foglight switch and then you only need the one relay

hi tim, i understand this but as i said i'm wanting to wire it to the correct switch out of the sx, as i said previous, i know pins 1, 2 and 4 are not used in the 60s which it is on the 60sx, i'm thinking that 1 is possibly a constant earth, 2 is earth from the lights and 4 is the live, this is what i'm trying to find out,

i've had spot lights wired up to the car so i understand how to wore them up to an independant switch

please please please can someone help me,
cheers

BUMP

can anyone else help please