Hi guys just a quick question, will these wheels fit my 03 plate mk2 1.2 punto:

http://cgi.ebay.co.uk/FIAT-PUNTO-Al...s_ET?hash=item2ea7887f92&_trksid=p3286.c0.m14

A quick reply would be much appretaited =]

Quick answer - Yes. The mk1 and mk2 fitments are identical. If I were you though, when the tyre come up for renewal, replace them with 185/60 R14. 165 is a bit narrow and so the rim sticks out, vulnerable to damage.

mike i've found some more wheels:

Tyre Width: 195
Rim Diameter: 15 inches
Aspect Ratio: 45
Load Index: 78
Number of Studs: 4
Speed Rating: V: max 149 mph
Stud Diameter: 98
Rim Manufacturer: Fox

Your advice would be perfect, also as before these were recently on a mk1 punto.

Thanks
Ben

All those figures match what you will need. However, there is one missing, you need an ET (offset) value of '35'. If this value is smaller than 35, there is nothing that can be done (wheel sits too far out of arch) but values greater than 35 can be compensated with spacers (speak to richie.guy for these parts).

cheers guys, is there anyway i could ask the seller to measure the offset of the wheels?

Just found these:
http://cgi.ebay.co.uk/fiat-coupe-20...s_ET?hash=item2302e58d4b&_trksid=p3286.c0.m14
Will they fit a mk2 2003 punto, and anyone got any comments or opinions about them?
Thanks
Ben

Just be careful with the carlsalter site, alot of the Fiat fitments are wrong apparently.

Benjy, those wheels will fit nicely. Many Punto owners use them if they want to fit Coupe Brembo brakes (or Wilwoods if you don't want the weight of a dead cow on each corner).