General Changing headlights... HELP I'm Stuck!!

Currently reading:
General Changing headlights... HELP I'm Stuck!!

David_1984

Member
Joined
Apr 13, 2008
Messages
201
Points
55
Location
Yorkshire
Just got some bulbs delivered.

I have Haynes manual but I can't seem to get the clip holding the bulb in place to move.

Any advice?

philipsxtremepowerh7.jpg
 
i did it on my car and i say be a man and push harder it might hurt but get over it
 
erm

you just have to push it and jig it around a bit. just a clip really, should be piece of pie.

and in answer to your question in the other thread, no i dont have the xenon lights, because they are in fact, not xenon lights. HID's for me, thanks :)
 
Ziggy
They aren't HID bulbs.
These require no modification to the wiring. They just replace the stock bulbs.


Doovy
Well I think they ARE xenon lights.


I have fitted them, took me forever, but manged to fit them.

Now I can't put the cover over where the relay box is. :(
 
ahhhhhhhhh ffs

xenon is the type of gas that is in the HID lights, what you have are not xenon lights!!!!!!!

they are simply meant to look brighter than standard, rarely working.

to put the cover back, undo the 3 nuts holding the headlight in place, moving it about forward and back till you have enough room
 
ahhhhhhhhh ffs

xenon is the type of gas that is in the HID lights, what you have are not xenon lights!!!!!!!

they are simply meant to look brighter than standard, rarely working.

to put the cover back, undo the 3 nuts holding the headlight in place, moving it about forward and back till you have enough room

Was fairly sure you could by Xenon filled bulbs as apposed to Halogen?:confused:
 
Back
Top