Hi guys,
Can anyone help me out, I am replacing the cylinder head gasket on my sons punto(1.2 8 valve), the cylinder head needed skimmed so I stripped the head, I'm now re-building the cyl head and wondered if anyone had the torque settings for the cam shaft bearing caps. Cheers

16v is 15Nm, or 11lb ft in old money. Not sure if an 8v is the same.

cam cap fixing bolts on a 1.2 8v are 20Nm for the M8 x1.25 bolts, 10Nm for the other M8 and 19Nm for the M8 nuts.