Styling Will my alloys be fine to go on my MK2b Punto?

[FeRRaRi_oNuR]

i have Fox Evo 3 Racing alloys and the offseet is ET42 i have ordered 10mm hubcentric spacers with longer bolts for the rear however this will bring the offset down to 32 will this be safe to drive with..also the alloys are 4x100 so all bolts will be wobbly..
all replies are appreciated..

 

[crabbo_1]

Is the centre bore of the wheel the same as the hub on the mk2b?

 

[Luke M]

yer they will fit ok. just make sure you get 9 full turns with the bolts.

as for the bore, you will need spigot rings.

 

[FeRRaRi_oNuR]

i have the relevant spigot ringd and the centre bore;s on the spacers are 58.1 so it all seems perfect.. the spacers arrived today however the bolts were short. i will be getting longer bolts to make sure they hold on fully.
thanks ppl

 

[crazydave]

should be fine

 

[FeRRaRi_oNuR]

hi there peeps i have received the longer bolts however these seem too long. they are almost 5mm out when you screw them in? basically the screw goes throgh the tread fully but comes out at the back on the hole? will this cause any harm?do you think it will touch any of the brakes?