Panda 2012+ 2018 Black Panda Pop 1.2

Currently reading:
Panda 2012+ 2018 Black Panda Pop 1.2

Joined
Jun 1, 2021
Messages
413
Points
225
Location
Horley, Surrey
Hi all
I've just signed up to the forum & thought I would introduce my panda. It is a 2018 Panda Pop 1.2 in Darkwave Black that I purchased pre reg with delivery miles in June 2018 from Thames Fiat at Tunbridge Wells. As you can see I have added a few genuine fiat accessories in the 3 years I have owned the panda including

Red longitudinal roof rails(matching mirror covers just ordered)
Genuine squircle decals
Genuine short aerial
Genuine panda pillar badges
Genuine moulded boot tray with panda logo
Genuine rear bumper guard
Full size genuine spare wheel
Genuine bumper rollout cover
Genuine panda sill guards
Genuine front seat coathangers
Genuine personalisation kit
 

Attachments

  • 20210530_195238.jpg
    20210530_195238.jpg
    3.2 MB · Views: 164
  • 20210530_195220.jpg
    20210530_195220.jpg
    3.7 MB · Views: 76
  • 20210530_195153.jpg
    20210530_195153.jpg
    3.8 MB · Views: 87
  • 20210530_195135.jpg
    20210530_195135.jpg
    3.6 MB · Views: 86
  • 20210530_195117.jpg
    20210530_195117.jpg
    4 MB · Views: 86
Welcome aboard Matt

Looks nice and shiny :cool: - but I'll bet its a pig to keep clean - road dirt in winter; dust in summer.

Im sure you'll find plenty of good gen here. ...And they're all a friendly bunch
 
It had the usual flat spot when it was new which was expected having driven my dad's punto, now on 27k it seems to have freed up quite a lot, although it still manages to catch me out every now & then. I noticed an improvement when I changed the oil from Selenia to Castrol Magnatec with genuine Fiat Filters
 
Looks good but one thing you can do that will improve it even more and cost you zero, remove the huge dealer sticker from the rear screen :)
 
I always remove them and have never had a problem, do it on a warm day and the glue should be nice and soft.
 
As you can see I have added a few genuine fiat accessories in the 3 years I have owned the panda including

That is a nice job. I have added most of the same items to my white Panda. I really like your number plate holder. Do you remember where it came from?

I agree about the sticker. Make sure you pull it slowly and exactly along the lines. I have removed many over the years and have never damaged the HRW elements. The longer you leave it the harder it gets so go to it. You could always tell the dealer to do it. If you didnt ask for it to be there they have a cheek putting it in in the first place and if its fitting caused damage its up to them to sort that out!
 
Last edited:
That is a nice job. I have added most of the same items to my white Panda. I really like your number plate holder. Do you remember where it came from?

I agree about the sticker. Make sure you pull it slowly and exactly along the lines. I have removed many over the years and have never damaged the HRW elements. The longer you leave it the harder it gets so go to it. You could always tell the dealer to do it. If you didnt ask for it to be there they have a cheek putting it in in the first place and if its fitting caused damage its up to them to sort that out!

Hi Panda Nut, I got the number plate holders off ebay for about £16. They are still advertised on there now for around the same price, just type in Fiat number plate holder and a few come up
 
Back
Top