dlcperkins
New member
- Joined
- Dec 6, 2019
- Messages
- 1
- Points
- 1
Hello,
the car blowers stopped working a long time ago (during the summer) so i didn't address the issue at the time.
it is now winter and its a cold drive to work.
i have replaced the resistor but it doesn't seem to have made any difference, one thing i did notice is that my connector block only has 4 wires where as those i have seen in previous posts have 5....is this normal or am i missing a wire?
i am going to check the fan next but my question is is there a way to bypass the resistor at all?
any wireing diagrams of the heater system would be appriciated
thanks
the car blowers stopped working a long time ago (during the summer) so i didn't address the issue at the time.
it is now winter and its a cold drive to work.
i have replaced the resistor but it doesn't seem to have made any difference, one thing i did notice is that my connector block only has 4 wires where as those i have seen in previous posts have 5....is this normal or am i missing a wire?
i am going to check the fan next but my question is is there a way to bypass the resistor at all?
any wireing diagrams of the heater system would be appriciated
thanks