I need to buy a head and a set of pistons


a valve broke just below the head and it wrecked the head and the head of the valve is stuck side ways in the piston




or what are my repower options

1952m37 said:

I need to buy a head and a set of pistons


a valve broke just below the head and it wrecked the head and the head of the valve is stuck side ways in the piston




or what are my repower options

Click to expand...

Hi, and welcome,

if you can give a hint on year and engine number / type,
it may be better than us guessing from the WIKI page;

http://tractors.wikia.com/wiki/Fiat-Allis

Charlie

varesecrazy said:

Hi, and welcome,

if you can give a hint on year and engine number / type,
it may be better than us guessing from the WIKI page;

http://tractors.wikia.com/wiki/Fiat-Allis

Charlie

Click to expand...

Don't feed the trolls

D

I believe it is an 80s machine

I think the engine is iveco ? 108 horse power?

I will get the vin tomorrow

where can I run the vin to see what year the machine is

thank you for the help



and I'm not a troll

oh yeah its a non turbo

6 cyl iveco 108 hp

1952m37 said:

oh yeah its a non turbo

6 cyl iveco 108 hp

Click to expand...

Any idea on its capacity

Even bore and stroke..as you got it apart..

varesecrazy said:

Any idea on its capacity

Even bore and stroke..as you got it apart..

Click to expand...

maybe Friday I can measure bore and stroke


when we got the machine it had sat for so long that the piston rigs were so dried up that it wouldn't even fire on ether we dumped some 2 cycle oil down the intake and it started to pop an I began to run after it got fuel it it was a nice running engine after it got fuel