Hallsy200sx
New member
- Joined
- Feb 10, 2005
- Messages
- 56
- Points
- 17
Right, after my other thread, I;d had all the splash guards and cambelt cover off checking for a leak from the water pump. Put them all back and now it won't start
Instead of firing it kind of back fires and blows the fuel back through the inlet. Only thing I have done is rotated engine slightly whilst removing the crank trigger wheel/front pulley, and it's raining so the engine has got slightly damp.
Can anyone think of anything obvious, I'v tried with no throttle and full throttle, it just splutters more with full throttle.
Instead of firing it kind of back fires and blows the fuel back through the inlet. Only thing I have done is rotated engine slightly whilst removing the crank trigger wheel/front pulley, and it's raining so the engine has got slightly damp.
Can anyone think of anything obvious, I'v tried with no throttle and full throttle, it just splutters more with full throttle.