can anyone give me advise on wheel fitments
i am buying a fiat 500 1.2 pop at the end of the month and am looking to fit a set of alloys.
will these fit without any problems with rubbing etc.

16"x6.5J PCD IS 4X108

sorry if this question is in the wrong area, wasnt sure where to put it.
thankyou in advance

No chance with that PCD, Fiat PCD is 4x98. For future reference, you also need to know the offset (ET) and center bore.

sound like french car wheels Pah.....

no you won't even be able to bolt them to the car hubs let alone have to worry about rubbing

Although written for Cinqs and Seis, this is a stonking guide, much of which will apply to the 500.

correction
pcd is 4x98
they are from an abarth
will they fit my 1.2 pop ?

If from an Abarth 500, almost certainly. I'm just unsure of suspensionj/ride height/gearing differences.

you'll need to find out the offset and the tyre size

just alloys - no tyres fitted

Compare the offset (et) then.