Hi folks,

I’m looking for two pieces of trim/rubber seals that sit under the Bonnet of my Panda 100HP.

The first piece is actually clipped to the underside of the bonnet itself right above the slam panel.

The second piece is a rubber seal that sits between the scuttle panel and the window wipers. It is spot into two parts and I only need the right hand section.

I know a picture speaks a thousand words but I am unable to work out how to post pics on here.

Thanks

Here are links to the pics.

The first one shows three holes in a line directly below the leading edge of the bonnet. There should be a rubber seal here.

The second pic shows the trim that is missing, it runs along the bottom edge of the scuttle panel, you can see the left hand section is present but the right hand section is missing.


https://ibb.co/wJfcThT

And

https://ibb.co/yQ8hXkT

Slevin Kelevra said:

Here are links to the pics.

The first one shows three holes in a line directly below the leading edge of the bonnet. There should be a rubber seal here.

The second pic shows the trim that is missing, it runs along the bottom edge of the scuttle panel, you can see the left hand section is present but the right hand section is missing.


https://ibb.co/wJfcThT

And

https://ibb.co/yQ8hXkT

Click to expand...

From memory I think my 100HP looked as if there should be a rubber trim on ht scuttle but in fact I strongly suspect it only ever covered about 2/3 of the width and the rest had no trim. I think they may be like that.

The Panda Nut said:

From memory I think my 100HP looked as if there should be a rubber trim on ht scuttle but in fact I strongly suspect it only ever covered about 2/3 of the width and the rest had no trim. I think they may be like that.

Click to expand...

Interesting !

Thanks

The Panda Nut said:

From memory I think my 100HP looked as if there should be a rubber trim on ht scuttle but in fact I strongly suspect it only ever covered about 2/3 of the width and the rest had no trim. I think they may be like that.

Click to expand...

This. It looks odd but the trim only goes on one side.

Spike

Nothing to worry about, they’re all like that.

Cheers for the replies folks. I’ve just this minute looked at loads of different pics on google images and you are all correct! How strange, it really does look like there is a bit of trim missing.


If I could only find the trim in the first picture, I’d be a happy man !

Thanks again, the information is appreciated

Is the missing seal part number 51702155?
(Google for images!)

Believe it or not, it seems to be normal that this seal is missing too!

https://www.fiatforum.com/panda/195302-panda-bonnet-seals.html

There must be parts of the engine on each specific side that needs sealing.