Hi, migrated over here temporarily from the 500 forum pages.

I’m after a measurement favour from someone who owns a Panda like the one pictured.

Could someone tell me what the payload length if the backseats are down from the rear of the front seats, the width and the depth from the boot floor to the headlining?

I would be much obliged.

The Panda in the photo is the newer type. Try posting in the section.


The length front to rear alter depending on drivers seat position


I could measure mine but as they use different seat there might be a centimetre or two difference

The Panda since 2003, Fiat 500 and Ford Ka Mk2 all share the same basic platform so will all have similar load capacities. From the 500 onwards, while the floor pan and structure are the same, the axle track 50mm wider than the 169 Panda.

For specific information of this detail you'll need to visit a Fiat dealer and look in the user manuals for each car.

Edit -
Just found this which gives more than Parkers on the subject
https://www.topgear.com/car-reviews/fiat/panda/12-lounge-5dr/spec