Morning, does anyone have access to a fiat parts catalogue, if so would it be possible to post a diagram of the panda 100hp full exhaust system please. Thanks

Adam.

Morning Adam
Here is generic, if you give me your vin I can do an actual ?
Cap.

Many thanks, I'll grab the vin after work

Your reg number will do, I can get the vin from that

YK 07 ZZA, cheers.

adz83 said:

YK 07 ZZA, cheers.

Click to expand...

Hi Adam, yes, thats the correct diagram I posted - the prices are below. -if you need a specific item pricing let me know. (you should be able to get the jist from this)

Thanks again, it's the centre section i require. According to the MOT advisory it has a leak at the flexi pipe which i assume is the part straight after the join with the manifold/cat.

Hi, yes, it is the whole centre section - part 2 in the diagram.

51788194 AUXILIARY SILENCER
CENTRAL EXHAUST SILENCER Availability: Product that can be ordered D Weight (grams): 8350
Listed price(1): 179.66 GBP
Price including taxes: 215.59 GBP

It must be rather substantial to be 8.3Kg !! - should hopefully last as long as the other..
Change the bottom stabiliser bar on the gearbox to chassis at the same time - this can AND DOES get weak and causes a lot of engine movement.
Not an mot failure or warning usually as they look fine - they just go soft.. they are ony about 22 quid new (the 100HP is cheaper than the 1.2 ! - half price - my 1.2 has one lol) this will assist the longevity of the new section.
its part 9 on this image - actually 30 squids in UK,! yikes, only 25 Euro in Portugal... anyways, thats the beastie..
Hope that is of use.

Details for tie bar
51739522 ROD
ENGINE/TRANSMISSION INSERTS AND SUPPORTS
Weight (grams): 522
Listed price: 25.12 GBP
Price including taxes: 30.14 GBP

Cap.

ps - edit - those prices are from my 11 / 2013 price list database. but should be virutally the same.

There are things like this ... - probably tat..
http://www.ebay.co.uk/itm/like/2205...ff11=ICEP3.0.0&ff12=67&ff13=80&ff14=95&ff19=0

But personally I would be getting a new section complete. It is however, an option.

Seems quite expensive for a centre section, I need to get under the car and see what the overallcondition of the section is, if it looks good I might just try a repair piece for the flexi, alternatively I might just fit a straight through centre section and get rid of the flexi altogether. Thanks again.

adz83 said:

Seems quite expensive for a centre section, I need to get under the car and see what the overallcondition of the section is, if it looks good I might just try a repair piece for the flexi, alternatively I might just fit a straight through centre section and get rid of the flexi altogether. Thanks again.

Click to expand...

No worries, I would not get rid of the flexi piece though, it is there for a very good reason.
Perhaps look at a custom exhaust place and get them to make you one up in Stainless ? -
Whatever, best of luck with it.

Is there any chance you could post an exhaust diagram for a Fiat 500 1.4 16v, i can find a centre section for one of these for around £80 and was under the impression the exhausts were the same.

adz83 said:

Is there any chance you could post an exhaust diagram for a Fiat 500 1.4 16v, i can find a centre section for one of these for around £80 and was under the impression the exhausts were the same.

Click to expand...

I would need a registration or vin......

aha, found it, yes, same part number, same price. good price if 80 squids, bite his hand off.

That's the price from Euro car parts, it's a bit easier to swallow than the £200+ from Fiat!

63 inc postage on ebay,,, - be exactly the same as ECP...

http://www.ebay.co.uk/itm/Fiat-500-1-4-09-12-Exhaust-Middle-Box-Silencer-/321349165983

Good Find, Cheers.

Same part number again

http://www.ebay.co.uk/itm/Fiat-Pand...arts_Vehicles_CarParts_SM&hash=item4ad1e7234a

gets better lol - they will be pattern exhausts, and definitely not as long lasting as the original, but, it is well worth it at that price me thinks.
Nice one mate, happy exhausting..

Yeah true, but i'm considering going the stainless steel route in the future so it will do for time being. Thanks for your help.