ok 2008 panda 100 hp ,i have a slight pull to the left after having tracking tyres and all bushes drop links wishbones etc check all is new and tight ?
problem 2 i get a lot of rubber sqeeking whe turning left and right when parking im thinking strut top mountings ,may also be contribuiting to pulling to the left
problem 3 i wish to put my power cable for amp throught bulkhead where can i do this neatly
any and all info would be great thnk you

ALSO WHERE THE HECK DO I GET GOOD MOD PARTS IE COILOVERS EXAUSTS LIGHTS ETC?

stinkygusto said:

ok 2008 panda 100 hp ,i have a slight pull to the left after having tracking tyres and all bushes drop links wishbones etc check all is new and tight ?
problem 2 i get a lot of rubber sqeeking whe turning left and right when parking im thinking strut top mountings ,may also be contribuiting to pulling to the left
problem 3 i wish to put my power cable for amp throught bulkhead where can i do this neatly
any and all info would be great thnk you

ALSO WHERE THE HECK DO I GET GOOD MOD PARTS IE COILOVERS EXAUSTS LIGHTS ETC?

Click to expand...

Start by replacing the top mounts if you haven't done so already - if they are the originals on a 2008 car they will likely be shot. Take care to fit them correctly or you will have camber issues. Then get a proper 4 wheel geometry check to make absolutely sure eveything is square - these cars are prone to rear wheel misalignment.

ahh they did say the rear was out after i had 4 wheel laser tracking n balancing done im gonna replace top mounts with polly ones se if it helps ,thanks for your advice

Did it sort the problem?

stinkygusto said:

ahh they did say the rear was out after i had 4 wheel laser tracking n balancing done im gonna replace top mounts with polly ones se if it helps ,thanks for your advice

Click to expand...

Did u get polly mounts in the end? Where did u get them and how much we're they. Did that sort the left pull for ya? Mine is pulling and I had 2 all wheel aliments done with everything looking good. Both garages tried the car and said that they feel little pull but couldn't work it out why as the aliment was good.

hi i replaced strut tops and put polly bushes in made the ride better but still have pull ive heard it could be a steering sensor or a battery even a steering rack their prone to pull to the left im fkn sick ive had geometry check 4 wheel and back wheel is still slightly out ..polly bushes i got em from revoloution performance center probly most expensive around but over the counter im too impatiant lol

no its still their im getting really pissed its costing me a bomb to try n find th issue driving me crazy .apparently cud b sensor on rack or battery ?? if i get it fixed i will post for other panda owners ,thnx for your help guys

yer im getting same ppl cant figuire out why its pulling as everything is new and solid its driving me mad im gonna ring fat garage soon must be common ! polly bushes cost me 90 quid

ok heres an update on mods so far ,polly bushes ,laser tracked new strut tops 1000 quids audio, speaker adapters from fiat multipla also suspnsion is same as grande punto 05 so i hear ,fiat 500 duplex exaust im bidding on as ive heard one fitted on youtube its unreal ,ive orderd wind deflecters and abarthe full badge kit inc wheel centers ,i want fit 500 abarth 16" rims then al b done ,just put abarth red stripe on ,waiting for window etch barth logos ,and have installed canbus hid lights inc numberplate bulbs in ice white looks great ,al updat pics soon

Hi

Sorry to jump in half was through this, did I read right that you have had it tracked 4 times and the rear is still out? Is it one side or both? Have you been the owner from new as could of had a bump that has pushed the mounting points out or put slight twist on the arm had it with a lancia Dedra years ago the left rear wheel had stupid toe in after it got hit!!
Also with most roads they have a bit of camber in the middle to let water run to the kerbs so you always get a tiny amount of pull unless you run down the crown of Them, May get the poly mounts you have fitted, interested to see your feedback on them.

Plenty of folks have had new Pandas straight out of the factory with the rear geometry well out of limits - FIAT have replaced several out of true rear subframes under warranty.

This is one aspect of the manufacturing process where they need to improve on tolerances and QC.

yes well the polly mounts deffo improvement ,had tracking done twice 4 wheel alignment but back is defoo out i do think it could be axel im gonna ask fiat dealers to check it out as ive done all i can do im sick i love the car but this problem is making me loose interest in keeping it mines a ltd ed 100 hp too i now have abarthd it all up badges decals etc just waiting for my duplex exaust and abarth rims ,do you know what bulbs i cn use for the front without putting hid kit in 100w white bulbs ?????????????????

Get it to a decent tyre firm such as STS TyrePros. I had mine re-tracked at the other bozo's (Kwikfit) it made not a hoot of difference. At STS you can see the settings on screen in the waiting area and watch them wind things back to square. It now runs straight and square and only cost about £60. The rear is not adjustable but they can loosen the axle and get some movement. Enough in my case to get it within tolerance - just. Someone ought to ban Kwikfit from selling tracking as they patently cannot do it properly and do not have the right equipment.

cooperman1 said:

Hi

Sorry to jump in half was through this, did I read right that you have had it tracked 4 times and the rear is still out? Is it one side or both? Have you been the owner from new as could of had a bump that has pushed the mounting points out or put slight twist on the arm had it with a lancia Dedra years ago the left rear wheel had stupid toe in after it got hit!!
Also with most roads they have a bit of camber in the middle to let water run to the kerbs so you always get a tiny amount of pull unless you run down the crown of Them, May get the poly mounts you have fitted, interested to see your feedback on them.

Click to expand...

how did yu get more pics in your gallery i wanna upload more? cheers

turns out was not rack or tracking or struts or motor or sensor on colum it was ......wait for it ...bloody worn track rod and bushes and a tyre ,cost me a small fortune to find this out but!! the rear wheels are still a tiny bit out but does not affect drive anymore thank god ,anyone having issues ive become an expert on diagnosing the fault holla at me for help peace,p.s my fiat is abarthed up now mmm vrooom

might get mine tracked again at sts this time try to get the back in a bit better cheers peter

So the 500 Abarth exhaust is in then? What did u do with the bumper? Just cut it?

stinkygusto said:

how did yu get more pics in your gallery i wanna upload more? cheers

Click to expand...

You need to donate and then you'll get unlimited space