General New 100HP video on youtube

[grizzly_panda]

Hey I've uploaded a new video which -some- may like, and understandably (those who aren't fond of the centre silencer-less Ragazzon) may not like. Either way, it's my 100HP, with the GSR and Ragazzon and it's not just sitting there revving, it's flying :slayer:

 

[grizzly_panda]

By flying I mean flying in terms of Panda, don't want anyone jumping in putting me down, we know it's not a FAST car by any means but ain't no slug either

 

[DavePanda100]

Nice

The silver mirror covers part of the Pandamonium kit or you do them yourself?

 

[grizzly_panda]

Nice

The silver mirror covers part of the Pandamonium kit or you do them yourself?

I did them myself when I was a sprayer :slayer:

 

[Visorfett]

very cool

 

[Visorfett]

Whats the crack with "italian number plates" Grizzly?

Couldnt get a good look at them on the clip.

 

[DavePanda100]

Whats the crack with "italian number plates" Grizzly?

Couldnt get a good look at them on the clip.

These are mine, metal pressed and cost me £22....

 

[hpScot]

Whats the crack with "italian number plates" Grizzly?

Couldnt get a good look at them on the clip.

Oh I think if the 'Feds' were keen to identify both the car AND the owner clearly flouting the speed limit they wouldn't have to look to hard.

Nice sound mate and the induction kit certainly seems to be helping your progress on the public highway.

But can I seriously suggest you take this off YouTube (they call it that for a reason you know) and save the testosterone for the track? I'm sure the drivers of the oncoming cars seen in the video would appreciate it.

 

[grizzly_panda]

Whats the crack with "italian number plates" Grizzly?

Couldnt get a good look at them on the clip.

Yeah my plates are the same as davepanda100's kindly presented picture

 

[grizzly_panda]

save the testosterone for the track? I'm sure the drivers of the oncoming cars seen in the video would appreciate it.

I don't make a habit of this, although that's the image I seem to be portraying. Just wanted to capture it on video on a decent road because I know there are people out there who want to see and hear the 100HP with induction and exhaust mods, like me before I got them for myself :slayer:

 

[grizzly_panda]

although hpscot you do make a good point about the 'feds'. can you point me to a video editor which will let me blur out the plates?

 

[kryten14]

These are mine, metal pressed and cost me £22....

Ebay by any chance? got mine off there last september, i think they look the balls, esp on a new orleans blue one gives the front end an ever so slightly more aggressive look

 

[DavePanda100]

Ebay by any chance? got mine off there last september, i think they look the balls, esp on a new orleans blue one gives the front end an ever so slightly more aggressive look

Yeah Ebay, easiest place to find anything

Not put mine on yet, still cant decide how to attach them, screws or sticky pads.

How did you attach yours?

 

[kryten14]

Sticky pads on the back one (as per the original dealer supplied plate) and screws through the front one into the existing screw holes. Luckily the holes fell in a quite a nice place so as to allow the white screw caps to go on, looks really good

 

[DavePanda100]

Sticky pads on the back one (as per the original dealer supplied plate) and screws through the front one into the existing screw holes. Luckily the holes fell in a quite a nice place so as to allow the white screw caps to go on, looks really good

Yeah, think I'll sticky pad the rear one.

It was mainly the front one worrying me, don't think them sticky pads work well on the black plastic trim of the front bumper.

Don't fancy drilling it either, don't want to buckle or dent the plate.

Might just put a center screw in and over do it with the sticky pad stuff (stickerflex) on it.

:bang::bang::bang::bang::bang::bang:


(Sorry for the thread hijack too!)

 

[Visorfett]

Yeah my plates are the same as davepanda100's kindly presented picture

They do look really good, I like subtle modifications like that.


a big thumbs up from me

 

[Visorfett]

Oh I think if the 'Feds' were keen to identify both the car AND the owner clearly flouting the speed limit they wouldn't have to look to hard.

Nice sound mate and the induction kit certainly seems to be helping your progress on the public highway.

But can I seriously suggest you take this off YouTube (they call it that for a reason you know) and save the testosterone for the track? I'm sure the drivers of the oncoming cars seen in the video would appreciate it.

From what I saw, it looked a fairly quiet road, and Grizzly didnt look like he broke any speed limits.

 

[grizzly_panda]

Cheers visorfett

As for the fixation of the plates, my originals where sticky taped when i first picked up the car :worship:

So no screws, italian plates also sticky taped and they ain't goin' anywhere! Had them since october too :slayer:

 

[ThisBitterPill]

Oooh those Italian plates looked coooool

Just one question....Are they 'street legal' in the UK?

I want some!

 

[grizzly_panda]

Oooh those Italian plates looked coooool

Just one question....Are they 'street legal' in the UK?

I want some!

I've been told they aren't legal but I've been pulled over a couple of times, once for having my fogs on when it wasn't foggy :yuck: and the other time was, well, erm, I was 'enjoying' my car . First time the officer actually asked me about the plates and I said I got them because I think they look cool. Nothing else said. Second time nothing was said. Been plenty of occasions when there's been police behind me for a good few miles and nothing. So if they're illegal then I've been lucky so far...and may have just cursed myself :bang: