Is a plain old (not 4x4 or Cross) Panda meant to have a black plastic 'spoiler' running along the bottom of the front bumper (number 6 in the diagram)? My car has never had one since i've owned it.

It doesn't seem expensive. Does everyone else have one on theirs?

It should have one, my 2012 Lounge has one.

I crawled under the car and found the staple holes in the bottom of the bumper. What sort of 'stapler' would one use to attach it?

I believe they use Rivets.

It's definitely staples. I checked my girlfriend's 500 and it has a very similar airdam attached with staples. Seems like they do it that way so it'll break away if it gets caught on something which is why I wouldnt attach it with rivets or screws.

Yes, mine’s stapled too. I guess something big and commercial needed to do that - like in a cardboard box factory or similar packaging makers. A staple gun would put them through and then you could use a combination of fine-nose pliers to bend round then hammer to flatten the ends over? Or drill small homes and use thin cable ties?

Replaced this on my Stilo years ago. Drilled small holes and used Inox screws every 10 cm.

gr J