Does anyone have a diagram of the front body parts of a 2013 Panda 1.2 8v. I hit a roe deer and have smashed the plastic front bumper/spoiler. The garage my insurance company referred me to says such parts are not available here in Sweden, but I have seen on the internet that such parts are available in Germany. I should like to see a diagram of how it all goes together so that I know what parts to order. Very grateful of any help.
Technical 2013 Panda body parts
- Thread starter angtho
- Start date
Currently reading:
Technical 2013 Panda body parts
- Joined
- Sep 21, 2017
- Messages
- 695
- Points
- 229
As above Fiatdalys?
https://www.fiatdalys.lt/en/catalog/parts/707/26/10/2/33/0/0/CC1.2/CMBBG/GSX/front-bumper-
It will give you something like this (picture) use your VIN number for precise vehicle match.
My experience with a 4x4 front end is that there are lots of plastic clips that you need to be quite forceful with to separate and assemble but its generally ok to work with.
If you have front fog lights and DRL be careful not to let the weight of the bumper hang off the wiring; it will break CanBus type (thin) wires...
https://www.fiatdalys.lt/en/catalog/parts/707/26/10/2/33/0/0/CC1.2/CMBBG/GSX/front-bumper-
It will give you something like this (picture) use your VIN number for precise vehicle match.
My experience with a 4x4 front end is that there are lots of plastic clips that you need to be quite forceful with to separate and assemble but its generally ok to work with.
If you have front fog lights and DRL be careful not to let the weight of the bumper hang off the wiring; it will break CanBus type (thin) wires...
Attachments
Drop www.shop4parts.co.uk a message and see if they can source and ship for you. They don't have the bumper on their site right now however they've sourced parts for me before and shipped to Johannesburg so I don't think Sweden is a problem.
They did until quite recently list bodywork on their site.
They did until quite recently list bodywork on their site.
