Hi. After I fitted a new clutch and dual mass flywheel to my 63 reg 4x4 twin air Panda I have a peculiar niggle (Not personally - on the car!)
After a couple of miles, I get a "Stop start unavailable" message and a triangular orange "!" warning light which then stays on for the rest of the journey.

Battery is new and fully charged.


Any ideas folks??


Cheers.

Dobcrosser said:

Hi. After I fitted a new clutch and dual mass flywheel to my 63 reg 4x4 twin air Panda I have a peculiar niggle (Not personally - on the car!)
After a couple of miles, I get a "Stop start unavailable" message and a triangular orange "!" warning light which then stays on for the rest of the journey.

Battery is new and fully charged.


Any ideas folks??


Cheers.

Click to expand...

Your best bet is to use an code reader plugged into the ODB2 port to see what the car's beef is.

The best option is an ebay cable and a copy of MultiECUscan for your window laptop though a £10-£15 reader off ebay may be enough for now.

Likely one of various switches and so forth but my money would be on the switch operating on the top of the clutch pedal. You'll need to do some yoga before looking at that.