I have a 14 plate 1.2 Panda Lounge. Curving up from inside the sill of the drivers door (RH drive) to in front of the lower part of drivers door under the dashboard is a moulder piece of black plastic trim. Near the top of this trim is a recessed hole through which ‘something’ used to attach the trim to a plastic ‘block’ attached to the body of the car. This ‘something’ has long been lost since before I bought the car second hand. Can anyone out there identify what should go through the hole to hold this trim please. ... and if it’s a specialist fixing, any thoughts where I can get one from. (It doesn’t appear to be a flanged screw, and I can’t get at the one on the other side of the car as it’s behind the bonnet catch). Many thanks!

Anything on this diagram from the parts catalogue?
.

Yes! Thank you; parts 4 and 6. But I can’t help thinking that there is something special about part 6 because mine just has a slot in it too big for the screw to screw in to.

Do you have the diagram for the other side of the car Davren?

MuddyPaws said:

Do you have the diagram for the other side of the car Davren?

Click to expand...

No.... the diagram is just for identifying parts to order. It show items 1 and 2 with different part numbers for the left an right side.
.

Doh! Just realised parts for both sides are on the same diagram!