Hi, is it possible to buy just the lens cover for the side lights or do you have to buy the whole unit? I see the whole unit on ebay for around £20. And are they easy to replace? Thanks.

https://www.shop4parts.co.uk/?name=store&op=Details&ProdID=14049&sku=254694

Best I can find

To my awareness you can't replace the cover. Shop for parts is prob your best bet as it is the same part as OE and at that price it's a decent buy.

Thanks for the info. Interesting that it says 'not 4x4'. I wonder what's different about the 4x4? Mine's is a 4x4...

Ah, the 4x4 has a black surround. Will need to find the part number.

I believe part numbers for the 4x4 are
51 880 631 and 51 880 632 (left and right)

Difference is a black surround which is inside the light

Fitted to rear of bumper via three screws, which you may be able to reach via the 'hatch' inside the front wheel arch (see post #6 in this thread: https://www.fiatforum.com/panda-iii/433980-daylight-running-lights.html )

Hi Hillhopper, you seem to be a man that knows things.
Can you lay your hands on the part number for the rear wheel bearing on a 2013 4x4
I've been told by my mechanic he needs them on hand because he believes the bearings will split when he changes the discs, looking up the various parts sites it's confusing and not widely available.

Cheers
George.

gullyfoyle said:

Hi Hillhopper, you seem to be a man that knows things....

Click to expand...

I know where to look

https://www.fiatdalys.lt/en/catalog/parts/443/21/10/2/33/0/0/CC1.3/CMBDS/GDX/rear-fuse-and-hub
(part 3 is bearing, part 4 the retaining clip). Same part number as front bearings on non 4x4 Panda...

so, https://www.shop4parts.co.uk/?name=store&op=Results&keywords=46531160

gullyfoyle said:

...he bearings will split when he changes the discs...

Click to expand...

I was wondering how you were getting on with that. Mine (37,000 miles) looking like attention may be needed soon-ish.
Pete

Herts Hillhopper said:

I was wondering how you were getting on with that. Mine (37,000 miles) looking like attention may be needed soon-ish.
Pete

Click to expand...

Not getting on at all mate, not long back from a lengthy trip to the States and getting through the dross on our return, the pads and discs on the rear are not too bad, but I have a set of Pagid discs and pads to go on as soon as I can find the time to book her in.

Thanks for the info, very much appreciated.

I now have the proper replacement unit with black surround for the 4x4. Tried fitting it. Massive fail going in via the wheel hatch didn't give enough access so tried going in from top. This meant removing the headlamp unit but I couldn't get that out either (had removed all visible bolts but it wouldn't budge). Now wondering if it's a bumper off job to replace the drl unit?! Help!

Another thought, are there workshop or repair manuals for the new Panda available online anywhere? I had a quick Google but couldn't find any...

Hi guys

wondered did Kenny find best way to replace the sidelamp on the Panda. I have to do the same thing on my daughter's car and noticed it seemed a tricky job?

I've found a complete brand new sidelamp unit for £23 on eb*y so hope that'll be good. Main dealer was quoting £33 + vat + delivery (and that with 10% off!).

This one's a standard 1.2 8v Panda (not 4x4).

Cheers

Ah yes Sir, the lens does come as a replacement part. You just need to order.......
a newcar and you will find it comes with a lens as part of the package. The cost?

That will be just a couple of arms and a coupe of legs!