Hello all,
Picked up a Panda Easy 3 weeks ago and have been trying to install a Nokia Bluetooth Phone Car kit (CK-300) into the car. Originally it was in my Mk 2 Punto (which had a Blaupunkt Lausanne CD30). When connected to the head unit in the Panda (the Continental one) the radio starts up but displays "code error" and not much more. If i remove the car kit the radio functions normally.

Is it a case of all bluetooth kits being locked out and/or visiting a dealer/ or 'hacking' the radio?
Or only using certain kits such as the parrot mki9100?

The Nokia Kit is a wee bit older than something from Parriot for example, but the quality of the audio is substantially better in my opinion and anything is better then the blu&me system

Thankx

put this in the ice section for more views
Your right about that kit, as i had one and it is very good and worked well.
LUIGI

So just an update, after some more tinkering.

the wiring is diffrent. The kit has 3 mute pins which on the head unit are now used for the CanBus H/L and remain unconnected so the car is unable to talk to the radio and you get a code error.

i think now i will have rewire the plugs on the car kit and look at connecting straight though for the can bus or give up and use something else