General Panda Parts Request

Currently reading:
General Panda Parts Request

Hi,

I need 5th gear set, syncro, fork and bearings for a 2000, Trekking 1108 SPI.
Searching on here it looks like it is 0.731 ratio.
Mine went from whinning to a "flapping" noise.

regards,
Nick stuck in 4th :-(
 
Hi,



I need 5th gear set, syncro, fork and bearings for a 2000, Trekking 1108 SPI.

Searching on here it looks like it is 0.731 ratio.

Mine went from whinning to a "flapping" noise.



regards,

Nick stuck in 4th :-(



Hmmm
Best bet to get the full kit?
 
Hello. I am looking for the back part for the panda van, the piece that makes into a van so to speak. This can be attached to a normal panda right?



I found one in italy but when I contacted them they called me a fake and odviously thought I was trying to trick them somehow.



IMG_4360.JPG
IMG_4359.JPG
Selling the car complete for €1600
 
Hi, new (today) to the forum and first time Panda owner. Bought and drove my Panda 1993 1000 CLX home and filled it with petrol only to discover a leak in the plastic fuel tank - there is a scuff and fuel is seeping out very slowly, only evident now I have filled the tank. Private sale so no comeback. Can anyone tell me best place to get a new or used fuel tank to replace it? Can't see any when I search online. Thanks. Tom
 
Hi, new (today) to the forum and first time Panda owner. Bought and drove my Panda 1993 1000 CLX home and filled it with petrol only to discover a leak in the plastic fuel tank - there is a scuff and fuel is seeping out very slowly, only evident now I have filled the tank. Private sale so no comeback. Can anyone tell me best place to get a new or used fuel tank to replace it? Can't see any when I search online. Thanks. Tom

Whilst you are looking for a replacement, two part epoxies are resitant to petrol and will do a good job of plugging the hole, particularly if it is a weeping scuff. Drain the fuel down, clean the area, smoother with glue and cover with duck tape to stop the glue running as it cures.
 
Hi, new (today) to the forum and first time Panda owner. Bought and drove my Panda 1993 1000 CLX home and filled it with petrol only to discover a leak in the plastic fuel tank - there is a scuff and fuel is seeping out very slowly, only evident now I have filled the tank. Private sale so no comeback. Can anyone tell me best place to get a new or used fuel tank to replace it? Can't see any when I search online. Thanks. Tom

Hi, I have a spare tank that should fit your car - you can have it for nothing, but it is down in South Devon!
Cheers,
Mike
 
Hi, I've been looking for a very specific piece of 4x4 trim for ages, it's the piece behind the door on the right side from an early mk2 4x4. This has a recess for the '4x4' badge which then is flush with the surrrounding trim, seems to only be on the very early (86/87) 4x4s...

Basically the right-hand version of the attached, which is on italian ebay at the moment. Anyone who has one kicking around please let me know or any other help gratefully received!
 

Attachments

  • modanatura.JPG
    modanatura.JPG
    120.5 KB · Views: 69
Hi, I have a spare tank that should fit your car - you can have it for nothing, but it is down in South Devon!
Cheers,
Mike

Thanks very much for the kind offer Mike. I have now got a new one, hopefuly arriving today.
Much appreciated.
 
Hi, i’m new to the panda community and trying to source a rear bull bar for last month or so with no luck! Specifically looking for full width, lift and tilt bull bar that allows access to the boot.

Any help or direction is very much appreciated.
 
Hi, i’m new to the panda community and trying to source a rear bull bar for last month or so with no luck! Specifically looking for full width, lift and tilt bull bar that allows access to the boot.



Any help or direction is very much appreciated.



I’ll try to find one for you
It’s yours a 4x4?
 
Going to Italy soon
If you need spare parts could source them for you [emoji1417]
 
Back
Top