Technical flashing red light on dash like injector

Currently reading:
Technical flashing red light on dash like injector

Joined
May 5, 2009
Messages
562
Points
159
Location
west yorkshire
Hi all, well i was ready for turning over the onyx today but when i turned ignition on the was a loud clicking coming from the 2 relays next to the blue map sensor...
also there was a flashing red box on the dash pod(left side under the car diagram), it looks like a picture of the injector and flashes in time with clicking..

anyone help.....?

thanks

kevin

PS, its a 998 spi on a 1994 plate
 
yes i have but since seen i not connected the blue pipe to the evap pipes on tank.....

turned it over but didnt start(new plugs) but will check tomorrow night if plugs are sparking, will take fuel feed pipe off as well to vent to make sure fuel getting the TB.

presume it should start without the air filter box on a SPI..

i did notice that the earth lead on the ECU metal cage was not connected...ooops.

will make sure all wires connected tomorrow night and give another go.

cheers.
 
YEEEEHHHHHHHAAAAAAAA.

well i got the darn engine running.

here we go:-

no spark from plugs, fuel pumped to TB but slow... so i thought to my self why no spark, checked all the wires and seem ok.........untill.....i located the 2 wires that i didnt know where they went, the green with black strip and the grey with black stripe, now i know where they go because i fitted the green to starter and gray to earth(exhaust bracket from engine), turned ignition on and no clicking from fuel pump relays and i heard the injector sorta prime itself.....turned engine and sparks from plug, so refit plug and turn away and she fired up instantly, rather funny realy with a big cheesy grin on me face cos only had the exhaust manifold fitted.

so i feel quite pleased now that it runs...

will update the onyx pictures this with the progress.

one pleased bunny tonight.

kevin
 
Back
Top