Hi
I hope someone can help.I need to locate the fuse for my electric window.
Ive read the manual ,Is it behind the glove compartment,if so how do I take the glove compartment out as it has the key for airbag.

westy2501 said:

Hi
I hope someone can help.I need to locate the fuse for my electric window.
Ive read the manual ,Is it behind the glove compartment,if so how do I take the glove compartment out as it has the key for airbag.

Click to expand...

Hi

On a 169 panda.. the main fuseboard is by the UK drivers right knee..
2x philips screws hold the panel in place


If you have already disturbed the glovebox.. I hope you didnt damage that isolator switches wiring.. like I did

Charlie

https://www.fiatforum.com/panda/181...stic-socket-location.html?181030=#post1951235

Same info

yeah I've looked at that fusebox but no fuse in there for the electric windows

westy2501 said:

yeah I've looked at that fusebox but no fuse in there for the electric windows

Click to expand...

koalar probably knows the answer to this

Fuse 35 apparently

https://www.fiatforum.com/panda/351...t-u-further-thoughts.html?351856=#post3495904

lets start at the beginning

do you have the owners manual


which model do you have


righthand or lefthand drive 4x4, 1.1, 1.2, 1.3 active and so on.

my RHD is by the steering column.

left and right windows use separate fuse

if neither widow work its unlikely to be these fuse on the body computer


these are the 20A ones

varesecrazy said:

Fuse 35 apparently

https://www.fiatforum.com/panda/351...t-u-further-thoughts.html?351856=#post3495904

Click to expand...

correct

if both windows dont work


this 7.5A fuse is more likely power both switches


its next to the OBDII connector


Dont assume the fuse will be 7.5A or F35 Fiat chop and change the wiring quite a bit. But it will be in this rough location

Hi thanks,but I don't think it's the fuse .For some unknown reason when I pressed the swith the window went down slowly ,but when I pressed to go up ,it slowed down and stopped near top.So I'm thinking this could be the motor or needs lubricating

Sorry to hear this but I am pretty sure you need a new regulator. My Panda did this and was done by a Fiat dealer a few years back £145. Fortunately its a simple job and hte parts are much cheaper now. Get if sorted before it rains!!

Good luck

Fuse box is by the drivers knee on RHD cars behind a cover held bu 2 phillips screws.