Fiat ducato 2.8 jtd 2002 year

Currently reading:
Fiat ducato 2.8 jtd 2002 year

TM21

New member
Joined
Oct 29, 2020
Messages
3
Points
1
Hello to everyone

Could any kind person point me in the right direction please. I need to purchase a scanner to determine why the engine management light has come on. Purchased one OBD 11 scanner from an online site but this appears not to be able to connect. Suggestions would be most welcome please.

Another problem is that when I replaced the cab battery the mileage dropped off by a few thousand miles! After a few more miles I disconnected the battery and again the mileage dropped back to where it had been after the first disconnection to replace the battery. Nobody seems to be able to advise me the reason for this peculiarity.

Grateful thanks to each and everyone:confused: for any assistance.
 
Thank you Chris - that is so helpful.

Best wishes

TM
 
If it's a 244, I can confirm Multiecuscan will connect to it. It doesn't let you do much though, not even reset the service indicator which I'm assuming is the spanner symbol next to the mileometer.
 
Thank you tul66 for your message and for which I am most grateful.

Looking at the registration certificate this details Ducato 18 JTD Back to Back 2800cc registered in August 2002 and so I am unsure which model this refers to. There is a 16 pin connection but whether this is OBD11 compliant I am uncertain as I purchased a basic scanner online which could not connect. I have contacted Fiat in Italy who are seeking to ascertain from their Technical Division whether or not my vehicle is compliant.

Incidentally the engine management light came on immediately after leaving the MOT station!

Thanks again for your reply.

Best wishes

TM21:)
 
Back
Top