I decided to change all the oils on my 2014 Panda 4x4.
I drained the rear diff oil out and now none will go back in!
If I try to put the oil in the filler it just comes straight back out.
I tried leaving the drain plug out and none comes out of that,just the filler.
I'm getting a bit desperate now as I need the car for work tomorrow.
Any advice most welcome!
Nick

You sir you have the correct hole?
Other then that try rotating the prop shaft a little incase the position of the gears is somehow stopping it filling

I'm pretty sure they are correct.
Two hex headed plugs on the n/s of the diff,one higher than the other?
I will try turning the prop and try again.Cheers