Panda 2012+ Towing dolly panda 4x4 to spain

Currently reading:
Panda 2012+ Towing dolly panda 4x4 to spain

Robinredrobin

New member
Joined
Nov 17, 2019
Messages
1
Points
1
Please help - I am trying to tow my panda 2014 4x4 to Spain behind my Motorhome using a dolly - peeps has told me to disconnect prop shaft to prevent damage . Is he correct and any other advice please
Orange 4x4
 
The owners handbook explains:
4x4 and Cross versions (except 2WD Cross models)
"the car can only be towed in one of the following ways...
- with all the wheels on the road surface
- with the front (or rear) wheels raised or resting on an emergency vehicle and the rear (or front) wheels resting on a specific trolley
- loaded on the flatbed of the rescue vehicle with all the wheels on the flatbed"

So, don't tow it with a towing dolly...

Removing the the propshaft is a major operation so probably not an option.
 
Last edited:
You could potentially tow on an a-frame (all wheels on ground), IF you can find a way to actuate the Panda’s braking system - I’ve seen it done on Smart cars etc, but it’s quite a hassle and will involve modifications to your Panda.
 
Last edited:
Back
Top