Hi everyone new on the forum so go easy !!! Lol
My heater blowers are not working , I've changed the resistor and the loom also and it is still not working trying to locate where fuse is to check that before I buy a new motor .... Hope someone can help Ewan

EWANMCINTYRE72 said:

Hi everyone new on the forum so go easy !!! Lol
My heater blowers are not working , I've changed the resistor and the loom also and it is still not working trying to locate where fuse is to check that before I buy a new motor .... Hope someone can help Ewan

Click to expand...

hi,
easy enough to put either a volt meter / test bulb to the wiring,

or a 12V power supply to the motor you have

the fuses SHOULD be listed in the FAQ's at top of Grande Section


Charlie

Fuse is behind usb port in glove box

My heater blower stopped working a week or so ago.

You don't need to open up the fuse-box - just look in the footwell and test for voltage at the motor leads. I did, and there was 10-12v. So the fuse must be OK, and the problem is with the motor...

So I took the blower motor out (4 bolts - very easy), spun it around and put 12v into it. It worked. So I put it back and it's been working ever since.

Fiat, eh....