Punto (Mk2/2b) Indicator problems!

Currently reading:
Punto (Mk2/2b) Indicator problems!

Joined
Apr 7, 2012
Messages
34
Points
16
Location
England
When i put my right indicator on, the back indicator light doesn't flash,
But the break light and tail light flash instead of my indicator, then if i pull up to a roundabout not touching the revs, it starts flashing too fast!


HELP!!!!!!!!!!!:bang::worship:
 
Lol. Advice helps folks. Take the whole light out and have a look at all the connectors. There will be one of the metal strips that links to the indicator. Checks its connection and clean them with a brass brush, fine emery cloth or electrical contact cleaner. Fine sand paper will do it but clean it with a dry tissue after. Change the indicator bulb itself in case it is the fault causing the negative feedback. Also check for any water penetration into the light, usually from a crumbling seal or split in the lense.
 
Back
Top