how to change the tail light bulb ??

Currently reading:
how to change the tail light bulb ??

geordie11

New member
Joined
Feb 12, 2012
Messages
18
Points
6
hi

as im new to this forum and fiats in general,im totally clueless how to change my passenger tail light on my w reg 2000 punto elx auto 1.2.

Any advice. help would be greatly appreciated as ive alreday been stopped by the police for it. Oh and i have the new bulb at the ready (y)

many thanks
 
Hi, to remove the rear light cluster you will need to remove the small plastic panel behind the light in the boot, & hopefully in with the spare wheel there shouldbe a plastic long socket tool, this you can use to remove the single nut behind the plastic panel,(use a pair of long nose pliers) if you don't have the socket,turn the nut anticlockwise. Replace bulb & refit light cluster but don't overtighten nut on reasembley.
 
Thanks for the reply,sounds easy enough,how do I remove the orange/red plastic panel next to the light cluster ? I'll give it a whirl.

Thanks again


Hi, to remove the rear light cluster you will need to remove the small plastic panel behind the light in the boot, & hopefully in with the spare wheel there shouldbe a plastic long socket tool, this you can use to remove the single nut behind the plastic panel,(use a pair of long nose pliers) if you don't have the socket,turn the nut anticlockwise. Replace bulb & refit light cluster but don't overtighten nut on reasembley.
 
how do I remove the orange/red plastic panel next to the light cluster? :confused: if you remove the little panel (possibly grey in colour) & undo the nut the whole light cluster can be moved so you can replace bulb.
 
Back
Top