- Joined
- Dec 10, 2007
- Messages
- 257
- Points
- 87
I am thinking of using the wheels and rear hubs from my Multipla for a trailer. Clearly the hubs will be suitable for the wheels. I have removed the hubs. I am unlikely to find a suitable model of Indespension unit but could possible use the stubs on the suspension if I could remove them. The stubs are 160mm long and appear to be screwed in the ends of the arms because the ends have hexagon sockets. The width of the arm is 80mm with the other 80mm being 45mm bearing stub of diameter 30mm and 35mm threaded part (the 160mm measurement is from the outer surface of the flange). The attached pictures show what I mean! Any ideas?
Attachments
Last edited: