Looks well with those lights that dark, will look even smarter when teh middle ones done too, very nice

Jordan

Just stick a bit of masking tape on it and do it on the car, that's what I did with mine

i dont tint with sprays the lights were done with a filmand im waiting to get a full working rear light unit as missing 2 bulbs but ill maybe give the rear drums a once over with black hammerite to see it through the winter as every one tells me about them ive only had the car 8 months peeps let me work on the little things some other time wanting to do bigger things

Wat film do you use abyss113 and where can you get it, Been looking for some and no one knows wat im talking bout as i dont like the final effect of tinting spray.

sexual

if you are a model builder this film is a godsend it goes by many names but is very difficult to use on that many curves

you can find various guides on how to use and its sometimes called solar film
but has varios names cant remember of the top of the head though so yo will have to do some hunting of your own

its a film that has 2 different temperature settings to be used at the lower temps about 100 degrees i think it sticks using its adhesive and at higher temp 120 degrees its shrinks so you use a heat gun to get it to stick to the edges then move to high temp and shrink the film into place

its designed to be a structural reinforcing for planes and comes in any color imaginable

MAKE SURE YOU GET THE SEE THROUGH ONE THOUGH
AND A SPARE SET OF LIGHTS ASWELL AS IT HELP TO PRACTICE

I have found a guide show what the stuff looks like and how to apply it hope this helps

http://www.rc-airplane-advisor.com/heat-shrink-covering.html

heres the person that i get the film off hes very quick and its a big roll of film also offers almost all colors but he has different types of film aswell as solarfilm

http://cgi.ebay.co.uk/SOLARFILM-Tra...ryZ19164QQrdZ1QQssPageNameZWD1VQQcmdZViewItem

I do have a spare set of lights to work on, so does that mean if applied its stuck on and tough luck if it dont work out?

I cant see transparent black on that listing, wat colour do you have?

i dont remember which film i used as i said there are that many films to use you get solarfilm solartec um polyester film just ask the model shop guy and he could probably help

and regards to the film it has a strong adhesive but a good enough rip and it will come off again dont know if it leaves any residue though

took a couple of pics this morning after work at about 4am gave the car a wash down and took it somewhere semi-bright











and im currently in the middle of waxing him so will get nicer pics up as these were on the phone

You have pink hair and a pink automatic car.... come on mate.... pmsl joking


Looking lush, i would not mind something like this

its purple hair buddy and i have my reasons for the automatic mainly the screws in my left hand from my skating days