new.jpg

Punto (Mk2/2b) Finaly! The JTD

Introduction

After not bothering to take any pictures of the JTD, ive finaly got a day off and decided its time :eek:

new.jpg

This is a pic of the car the weekend I bought it (last) completly as standard :)

So far since ive got it ive debadged the boot (leaving behind the JTD badge and the DK sticker as i havent tackled that yet :(), detrimmed the doors and rear quaters and just this morning ive added a set of 17" Wolfrace Snipers (y)


no1.jpgno2.jpg
no3.jpgno4.jpg
no5.jpgno6.jpg
no7.jpg

It isnt lowered yet! Still looks good me thinks :D I have got a lowering kit in the garage BUT i set about fitting it this morning only to be defeated by a bolt that rounded itself as i tried to get it off :( Not sure what to do about it but ill give it a go next week as ive got a week off and hopefully it wont be pouring with rain :mad:

The wheels have made it a little bit slower although the rolling radius really isnt that much bigger. Can definatly feel the difference BUT im sure the remap will sort that when i get it done (y)

So what you all think?
Bushboy said:
nah ive got a PI suspention kit.

pointless gettign coilovers with 17s cause it only needs lowering around 15mm.. dave measured his againced mine and his really aint that much lower than standard atall!
ah right.

need to spray the mirrors too.

that dk badge looks like its gonna be a dick to get off
 
the bolt thats rounded is the bottom bolt (of 2) on the bottom of the passenger strut that holds the strut to the hub...

wouldnt mind if it was the bolt at the top as i could just get a new assembly etc but with this bolt rounded i cant get the old strut out! ive got a better fitting socket now so im gonna try tomorrow night and see if i can get the kit on in time for MITcar! :eek:
 
Just got a new splitter for the rear bumper (y)

ive just attatched it for now (bolted and then fibreglassed from the back) but it will eventually be smoothed on and sprayed and at the same time ill smooth out the bump strip :D

nice and smmmoooootthhh... and low :D

no1.jpg

no2.jpg

no3.jpg
Back
Top