|
| Thread Tools | Search this Thread |
![]() | #46 | ||
Join Date: Apr 2019
Posts: 59 Thanks: 0 Trader Rating: 0 ![]() | Re: Pics of the wife’s 500 twinair 2011(modified in progress still) Forgot to say you have different settings so if you wanted it for economy then you can set it to that.
__________________
| ||
![]() | ![]() |
![]() | #47 |
Join Date: May 2012 Location: Quite south.
Posts: 3,114 Thanks: 52 Trader Rating: 0 ![]() | Re: Pics of the wife’s 500 twinair 2011(modified in progress still) I primarily use my TA in ECO mode when driving around town, I find the numbed throttle response smoother in start/stop traffic. Not sure if the 500 has the ECO button on dash? If so does it still work? |
![]() | ![]() |
![]() | #48 | ||
Join Date: Apr 2019
Posts: 59 Thanks: 0 Trader Rating: 0 ![]() | Re: Pics of the wife’s 500 twinair 2011(modified in progress still) Yeah ours has the eco button and it still works. With all these devices you can adjust to suit your style of driving .
__________________
| ||
![]() | ![]() |
![]() | #49 | ||
Join Date: Jul 2018
Posts: 6 Thanks: 0 Trader Rating: 0 ![]() | Re: Pics of the wife’s 500 twinair 2011(modified in progress still) Here’s a few pics of a very dirty car. But side skirts on as you can see. Still haven’t finished tidying up the blending of them because of the master seal but will soon as going on hols . Once back will sort it and take some close ups. Also I put new new plugs in which were the same that was in there but the dealer never tightened them up enough. Car runs soooooo much better now I have done it. Smoother, a lot more responsive. It’s like a different car. Something so simple can make such a difference.
__________________
| ||
![]() | ![]() |
![]() | #50 | ||
Join Date: Apr 2019
Posts: 59 Thanks: 0 Trader Rating: 0 ![]() | Re: Pics of the wife’s 500 twinair 2011(modified in progress still) Hi stevie, I used a bonding glue. Wasn’t tiger seal but another. Can’t remember the make. They did a black or white one . Once stuck I used masking tape to keep them in place for a few hours . Make sure where your bonding them on the car it is fully cleaned with a panel wipe. If you don’t have that use meths or white spirit . Gets old residue off for a clean bond
__________________
| ||
![]() | ![]() |
![]() | #51 | ||
Join Date: Apr 2019
Posts: 59 Thanks: 0 Trader Rating: 0 ![]() | Re: Pics of the wife’s 500 twinair 2011(modified in progress still) The bonding agent is master seal
__________________
| ||
![]() | ![]() |
![]() | #52 | ||
Join Date: Jul 2018
Posts: 6 Thanks: 0 Trader Rating: 0 ![]() | Re: Pics of the wife’s 500 twinair 2011(modified in progress still) looks really good , like your planned upgrades
__________________
| ||
![]() | ![]() |
![]() | #53 | ||
Join Date: Jul 2018
Posts: 6 Thanks: 0 Trader Rating: 0 ![]() | Re: Pics of the wife’s 500 twinair 2011(modified in progress still) Hi stevie, I used a bonding glue. Wasn’t tiger seal but another. Can’t remember the make. They did a black or white one . Once stuck I used masking tape to keep them in place for a few hours . Make sure where your bonding them on the car it is fully cleaned with a panel wipe. If you don’t have that use meths or white spirit . Gets old residue off for a clean bond
__________________
| ||
![]() | ![]() |
![]() | #54 | ||
Join Date: Apr 2019
Posts: 59 Thanks: 0 Trader Rating: 0 ![]() | Re: Pics of the wife’s 500 twinair 2011(modified in progress still) Sorry for the late reply stevie. I purely just used the sealant. I might of put some on the underside to so it didn’t flap but I will say it is solid
__________________
| ||
![]() | ![]() |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | Search this Thread |
![]() | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
![]() | Bookish | 500 | 23 | 27-01-2018 12:51 |
![]() | thethink79 | 500 | 2 | 22-05-2017 09:05 |