IMG_3548_preview.jpg

Punto (Mk2/2b) my punto mk2b

Introduction

hi!
i'm Dennis from holland,


IMG_3548_preview.jpg



and this is my mk2b (1.4 16v 2004).



dit some small modifications:)

-ta-technix coilovers
-16' 7.5j wheels with 175/50/16 front/205/45/16 back
-5mm spacers from a alfa 155 on the back (otherwise tire hits the shock bolt).

had a flat tyre at the back... so i did order 175/50/16 for the back as wel.
when i put the new tyres , i also going to set the coilovers on te back as low as possible:)
hi! i'm Dennis from holland,
and this is my mk2b (1.4 16v 2004).

https://image.ibb.co/bDyioT/IMG_3548_preview.jpg

dit some small modifications:)

-ta-technix coilovers
-16' 7.5j wheels with 175/50/16 front/205/45/16 back
-5mm spacers from a alfa 155 on the back (otherwise tire hits the shock bolt).

had a flat tyre at the back... so i did order 175/50/16 for the back as wel.
when i put the new tyres , i also going to set the coilovers on te back as low as possible:)
Odd choice of tyre size ,not?It must look like a SMART !!!
 
Odd choice of tyre size ,not?It must look like a SMART !!!




uhm no.....
when i bought my wheels the had this size:


-2x 215/40/16
-2x 205/45/16


215 is way 2 big, 205 should fit, and the profile was good.


thats why i set them on the back of my punto.


i allready did a order for the same size as the front, so i can go lower a the back:)
 
205 is too wide for a punto
Not enough weight to .make tyres grip.....

195 is used along with stock 185

Ziggy


i know 205 is too wide.


i allready have a new pair of tyres at home (175/50/16, same as the front)..


i like streched tyre's.
so i can lower my punto much more at the back;)
 
I’m runnning 205/45 ZR16 with 10mm spacers on the rear. Goes fine. No rubbing on full steering lock either
 
i know 205 is too wide.


i allready have a new pair of tyres at home (175/50/16, same as the front)..


i like streched tyre's.
so i can lower my punto much more at the back;)


Looking good, like the red wheels.


I had 8j wheels with 20mm spacers all round and was lowered 50mm. Tyres were 175/50/15s so had a bit of stretch to keep the tyre tread inside the arch.


 
IMG_3865_preview1.jpeg

so is sold my red wheels... and bought a nice set of black 16" stilo wheels!
the fit perfect. (with 3 mm spacers on the back)



also removed the coilover rings on the back, so the car is lower:)


also busy with alfa 147 seats! fitted the front... the back will follow soon, need some modification(y)
 
Last edited:
Wow those seats fit in nicely! As well as the stilo wheels.
 
thanx!
i also did some welding on the back seat.


now i have the front and back seat from a alfa 147 fitted:)


the wheels are nice, someone sprayed them very bad black...
i will restore them, en spray them purple of red this winter.
 
Back
Top