00147.jpg

Punto (Mk2/2b) thund3rdom3's Snowman mk2b =).

Introduction

thund3rdom3's mk2b low&slow

just one day after I said goodbye to my mk1, this one came to my yard; it's a 2004 mk2b powered by 1.2 8v engine packing the allmighty 60HP :D

It's still in stock, only the trunk is without lights and badges (except the "Punto" one, that will be removed soon). I only put in some music, since it came with no radio :bang: .. the HU is Pioneer DEH3300UB, enough for my needs, the front system is Hertz DSK165 and the rear is Hertz DCX 690, I finally hear the music, and with pretty good quality, considering the hardware used (entry level, no amp or woofer). The only problem is, and I learned now for the future, never rush into anything ; the speakers had to be installed THAT VERY MOMENT, and all went fine, except the positions of the tweeters ( see pics below) :bang::worship::bang::D

As for the future plans :

- coilovers are already ordered, they should come in one month time, maybe less.. that's when he goes closer to the floor :D
- Renault Laguna lip, which was intended to go on my mk1, will now be going here
- since I got new winter tires with the car, steelies will be sprayed black, and I'll start saving money to get some nice alloys & rubber till the summer
- blacked out headlights, debadged front grill, maybe some black mudflaps (just for the winter :D ), stickers..

these are just basic plans, there will be more done during the process,but for now, this is enough info, now it's time for some pics :)







































...and after one year, we come to this look... :D












for the list of changes, and the progress inbetween, read the rest of the thread :D
  • Like
Reactions: Joshhh and AnteLo
Re: thund3rdom3's Snowman mk2b =)

@ rawb - no, this winter they'll have to do without them, an for the next it's widened steelies so they don't need spacers :D

@colinf1 - nope, the noise is no different.. but maybe that's because I had no dampening in the first place.. anyway not much noise (y)

as for the green mk2a, it's my friend Raoul's, lowered on same TA Technix coilovers and somehow his gets lower at the back :bang: :D



he also has many plans with his car, and it's quite likely you'll see our cars on the same photos some more in the near future (y)
 
Re: thund3rdom3's Snowman mk2b =)

oioi :)

Had to go to technic check (something like your MOT) past week.. So first I took off the laguna lip, and then had to raise the front 3cm so I could even get in their garage :D

Of course, the next day I looked at my car and right after work I went to my garage (at my grandparents house, some 200m from my house :D ) to lower it back..

So then he looked like this







Kinda sad, with no lip to scrape.. So the lip went back on :D










And remember this thing that i got a while back?



Some say it's a steering wheel.. Some say it's a MOMO Drifting steering wheel.. I say it needed some change.. And it got some, one white stripe instead of four yellow, no "drifting" text (it just doesn't go with the punto) and no yellow MOMO letters on the right part (not too visible in the first pic)..



Now I have that special feeling I've been missing since the selling of my old Punto :slayer::slayer::D
 
Re: thund3rdom3's Snowman mk2b =)

You know what? I'm fed up with everyone with some i-Something, iPod, iPad, iPhone..



So, as no one likes to be left out I went with the flow and got myself this i-Thingy..









































:D


and here's my wish for everyone in the upcoming year




tnx to Sticker Point Studio for these two small but important additions (y)

 
Re: thund3rdom3's Snowman mk2b =)

hello there :D

the first big expense in this year was made.. well, "it" was cheap, but it will be expensive to get "it" to proper state to put on my car :)

and by "it" I mean a set of BBS RJs that need some refurbishing.. they're 7x15 et35 and this is their current state





the edges have to get refurbed, and then polished, and the heart will be sanded and painted in some crazy color (no way it stays gold).. i also have to get centre caps and 30mm adapters (they could be spacers, but when they're so thick they can be adapters to 4x100 plus the right center hole)..

and then, when all that is done, the final step will be 165/50 or 165/45 rubber :cool:

stay tuned :D
 
Re: thund3rdom3's Snowman mk2b =)

well, haven't been here for a while :D

@ eamonf - nope, haven't even started working on them, should begin soon, and hope to have them on the car by june - july sometime.. currently i'm looking for some good price new nankang ns2's in 165/50.. and the color.. let's just say they won't be pink.. :D

@ jamie - the first Laguna, pre-2000 model..


as for the news, nothing to say.. lip is now off, kinda like it this way, the line of the car is now normal, I don't scrape anymore, atleast not on regular basis (today I went to the vw dealer in search for the caps for my bbs and I almost managed to take off my front bumper).. :slayer: :D boot stickerbomb peeled off, I tried to stickerbomb my sun blockers (or whatever they're called), I still must decide if I like it or not.. :confused: no pics of that yet, but here are few pics from our last local meet..





 
Last edited:
Re: thund3rdom3's Snowman mk2b =)

and as I wrote my last post some crucial changes have been made to my plans..






so.. the BBS are now sold.. hopefully the new owner will take care of them.. as for myself, got me a set of these





Zender Sports, in 7x15, with 195/50-15 rubber on them.. so now I'm saving again for 165/50-15 rubber :bang: :D




and personally I think these will fit a LOT better :D
 
why not? for example your bumper strips don't show as much as mine (black on black vs black on white).. paint the steelies in some freaky color, get coilovers, lower the car, and consider that an beginning (y)

as for myself, while i'm waiting the money for new rubber, made a few changes :D I'll let the pics do the talking (y)













planning to have some fun with the alloys for the weekend, I have to get them ready as soon as possible :)
 
Back
Top