DSCN2272.JPG

Punto (Mk2/2b) Bredsticz MK2 BredMobile!.

Introduction

Okay! Been on here a while and never have posted on this section yet! So here's my car:




Last pic is a photoshop of a design I made that I may well put on the car :D
Status
Not open for further replies.
Re: Bredsticz MK2 BredMobile!

i like those toying with doing my wheels in white but not sure yet, like how you have been different, only one thing dont u need 2 change the whole rear wiper arm when it needs it.

Not sure. It's possible to pull just the blade out. But if I ever get enough money for my re-spray I'll be smoothing it over anyways
 
Re: Bredsticz MK2 BredMobile!

Bredddsticz <3 car loooks qualityyy as usuall.. tbh im not sure on the stripes, but the rest of it is bufffff :)

maybe get stripes down the middle running into the bumper ? allo white wing mirrors :) and get them skirts white aswell!!
 
Re: Bredsticz MK2 BredMobile!

I like the stripes :p
It is lowered 35mm and that'a a pain in the ass as it is. Front did seem to be sitting unusually high today for some reason though
 
Re: Bredsticz MK2 BredMobile!

looks great with wheels on m8 good job again, also think you need something going on on the sides think maybe blue wing mirrors don't want to over do the white from front elevation.maye be white abarth symbol on the side skirts.know it's prob a bit late as you removed 1 side but bump strips would have looked good in white.
 
Last edited:
Re: Bredsticz MK2 BredMobile!

the easiest way to change the wiper is by replacing the whole think imo - but u can just remove the blade and slide in a new blade and trim to fit. its cheaper that way but too much messing about for me. lol

Thought that was only saying coz hes got his white would be gutted if i had to paint it everytime the blades needed changing
 
Re: Bredsticz MK2 BredMobile!

Cheers Dombooth, iLeno: I bought cc'd standard bumpers and on the back you can push the clips out, You do need to unlock each clip and push! Then a good rub down with the green side of them cheap kitchen sponges you can buy (where one side is sponge and the other rough)
Sprayed the sprips with primer, gloss, lacquar. 2 or 3 coats of each.

The main white bit of the front bumper I masked off, rubbed down and painted in the same way.
Wait for the paint to dry properly before removing the masking tape and pop the strips back in.
The rear bumper strip comes out as a whole then push back in. Trickier to push back in than out
 
Re: Bredsticz MK2 BredMobile!

Cheers Dombooth, iLeno: I bought cc'd standard bumpers and on the back you can push the clips out, You do need to unlock each clip and push! Then a good rub down with the green side of them cheap kitchen sponges you can buy (where one side is sponge and the other rough)
Sprayed the sprips with primer, gloss, lacquar. 2 or 3 coats of each.

The main white bit of the front bumper I masked off, rubbed down and painted in the same way.
Wait for the paint to dry properly before removing the masking tape and pop the strips back in.
The rear bumper strip comes out as a whole then push back in. Trickier to push back in than out

Don't suppose you can help with removing the strips? Honestly don't budge. You take the whole bumper off?
And how long to dry out?
 
Re: Bredsticz MK2 BredMobile!

Yeah you have to take the bumper off 1st. Then push the clips from the other side.

15 minutes or more between each coat of the same type (primer, gloss or lacquar) and then 1 hr between each type of spray. It does say to leave 24hrs but I cba with that.
 
Status
Not open for further replies.
Back
Top