DSCN5189.JPG

Cinquecento My cinq sporting

Introduction

Hi all. this is just a few pics of me cinq,past and present.not got many of the actual car but lots of nice bits There will be a few more changes soon,like the roll cage going in etc:D

Pic1= me cinq with old bumper and on jr springs at me aunti's a few months back
Pic2= me engine bay atm
Pic3= 280 C&B cam:D :D :D
Pic4= Scrap cinq and some of its guts all for £350
Pic5= Old bucket seat with steering wheel and doorbars from cage. I dont know why but i love that picture
Pic6= Ground clearance with lower strutbrace and 60/40 JR springs
Pic7= KW coilovers and 50mm rear spring
Pic8= Front view,in crap condition(n)
Pic9= Spare flywheel...before
Pic10+11= Flywheel after
Pic12= Sparco wheels 13" ready for a refurb,strighten and a lick of white:yum:
Pic13= Cobra monaco
Pic14= Yes.......im so proud of them...i put my name on them
  • Like
Reactions: Scuderia
I'd buy a 10k one. :D

8500rpm was the suggested rpm limit with the standard pistons on 75 engines according to the wolf racing article found here:

https://www.fiatforum.com/cinquecento-seicento-faqs/95772-fire-tuning.html

I hope your valve springs will be up to the job, That is one fierce cam shaft.

Won't be fun in traffic I'm sure but should be mental when you drop the hammer. :yum:
 
Hiya, I am still alive :)

Still have the cinq, well I have a shell and a heap of nice bits to put on/in it. There has been no progress :(
Cycling and renovating my house has taken up all my spare time and money (bikes are expensive!!!) And the garage is not big enough so the car is still at my dad's.

Main priority is finishing off mings flywheel which has been half finished for a long time:eek:

Loads of parts lying around the garage makes me want to finish the car off and give it a good thrashing.
 
Hiya, I am still alive :)

Still have the cinq, well I have a shell and a heap of nice bits to put on/in it. There has been no progress :(
Cycling and renovating my house has taken up all my spare time and money (bikes are expensive!!!) And the garage is not big enough so the car is still at my dad's.

Main priority is finishing off mings flywheel which has been half finished for a long time:eek:

Loads of parts lying around the garage makes me want to finish the car off and give it a good thrashing.


Good to to your still around and still got it :) i can remember where your dads is ,, Ill come down and aquire some parts off you hahah
 
Ha. what parts would you like?
I do have a few bits that aren't required anymore.
Realistically, it'll be a year or two before I work on it again when I move house again and get a bigger garage. Or i could squeeze it into my current garage, but I wouldn't be able to work on it with much space.
 
Not much of an update buts it's something :)
Knocked up some diy spacers/pcd adaptors and adjustable top mounts are in progress

And mind's flywheel is finished :) finally.
 

Attachments

  • 20170313_165756.jpg
    20170313_165756.jpg
    3.4 MB · Views: 88
  • 20170313_165921.jpg
    20170313_165921.jpg
    4.3 MB · Views: 82
Cinq is in a new garage so I can actually walk around the car now.

Rear beam is off and the clean up is in progress. Fuel tank, lines and brake lines all chopped off as it'll all be internal.

Rear end isnt as bad as I thought it would be. Shouldnt take long to chop out the rust and weld some plate in. What will take time is cleaning all the rest of it to re-paint.

Aim is to clean up all the underneath and engine bay as that needs some welding too, sort the inside, then get it running, roadworthy and through an MOT with a stock engine before sticking the other lump in.
 

Attachments

  • 20180219_213211.jpg
    20180219_213211.jpg
    3.9 MB · Views: 78
  • 20180219_213159.jpg
    20180219_213159.jpg
    4.1 MB · Views: 81
  • 20180219_213232.jpg
    20180219_213232.jpg
    3.2 MB · Views: 82
  • 20171029_194033.jpg
    20171029_194033.jpg
    4.5 MB · Views: 92
Back
Top