KungFooPanda

I’m not sure the flange actually needs to be removed, I can’t see why it would need to be. This guy seems to have left his on.

This is the difference. The grey one is original 100HP, black one is £150 drum brake EBay jobby. The holes for the hubs are the same, so...

Modifying a standard axle is the only sensable option It's been done many time, easy at a garage, doable by a home mechanic. Finding a...

Use a standard Panda replacement axle. You will need to drill a hole in the stub axle mounting face to accept the ABS sensor. You could...

Hi everybody, had my beloved white 100 HP since new in 2010, only 40k on the clock, however I've got a new problem. After the recent...

My car had Bilstein B4 fitted at the rear, they were on it when i bought it but didn't look very old. Had a problem with an occasional...

I could have a dig into the ePer data to see how many blue ones with Sky domes there were. It would help if you can send me your VIN by...

Thanks for the image, much appreciated. This helps a lot with my understanding for when I take the struts off to check further. I...

There's not really anything apart from the correct orientation of the top mount rubber (as @koalar said above). Wasn't actually aware...

Not sure what the offset is you mention There are two parts that have to be assembled in the correct orientations The notch in the...

That is a ludicrous price. I could have bought a brand new unregistered 100HP in 2010 for £8995 cash.

Cheaper to find a kit this is all that required 1860987000, you can get away with circlip pliers, I use a couple of nails set in some...

Well done! Another friendly Panda on the roads makes the world a better place :) To make sure your Panda doesn't give you any nasty...

Brilliant. Well done. But remember the learning really starts now. You need to keep doing the htings you were taught. Its very easy...

Well done. This is base camp, not the summit. Concentrate, and learn every day. If you have any specific queries about driving...