hi does anybody know if the antiroll bar on a 20 valve marea is 22mm or 25mm and if the brava bushes are the same i think they are 22mm and the ulysse are 25mm trying to find a bush that fits the marea as you have to buy the complete rollbar

Which bushes are you taking about.The two main bushes that hold down the roll bar. Whats wrong with them, Never seem to wear. The drop links at the end usaully wear or the nut on the anti roll bar which holds them on breaks off.?? Different Bushes of different vehicle's would not fit anyway, or i would not think so.

the two bushes what hold the antiroll bar to the main frame have play in them and i have a heavy knock in wheel when going over bumps am going to change drop links anyway just thought i would change bushes as well as when you put pry bar in there is about 10mm of movment in bushes

You will have some movement have the antiroll bar has to move remember, and the buses are only rubber.Never replaced any off those bushes before thats why you cant get hold of them, Bottom arms are prone for knocking on marea's, bravo's ' brava'a , tipo,s . If you think about the bushes they are just a pivot point, i'd suspect bottom arms.

thanks for the advice fiatexpert will look at it tomorrow to see if any play on bottom arm thanks again