Punto 1.3jtd?

Currently reading:
Punto 1.3jtd?

faster4_tec

Burninator of threads!
Joined
Oct 22, 2004
Messages
7,344
Points
1,120
Location
Sunderland and LakeDistri
Took a 53 plate mk2/b 1.3jtd for a spin today, was quite overpriced (£5k for 42,000 mile 3year lowest of the low spec model, with a steering wheel warning light on:rolleyes: ).

Anyway, that little engine!!! what a cracker!!! but what a shed load of turbo lag!! 5th gear doesn't do anything below 65mph, although nailing it from rest thru the gears feels quick and torquey, it does actually make some progress on the dials, defo quicker than a 1242 8v to 60, and maybe quicker than the 16v when booting it about back roads.
fuel economy seemed good, even abusing it for 10miles it showed up as 48mpg, I reckon if you drove it nicely (quite hard actually as under 2000krpm it actually bogg'd down (in most gears:confused: ) and threatened to stall).

anyone have one?
can imagine the 90bhp 1.3 panda version is an absolute stonker:D
 
faster4_tec said:
can imagine the 90bhp 1.3 panda version is an absolute stonker:D
The multijet in the Panda is 70bhp, not 90. Apparently this is due to a lack of variable geometry on the turbo. No real lag as such on the Panda. If you let the clutch out at idle it'll take a long time to build up to about 1200-1300 rpm. Then you're off... :D
H
 
got to say in first from idle + WOT takes forever to get to 2k rpm (less than your average NA diesel) then at about 2200rpm it takes off in first.
but at speed in 2nd gear> it takes more like 2800rpm,
parkers price says it should be 3.5k!!
 
Back
Top