olirip
New member
To be honest I'm not sure as never had the need to open mine up.
I know the stalks are all one unit and are plug in but that's as far as my knowledge goes to be fair.
I'll have a nosey then thanks muchly
To be honest I'm not sure as never had the need to open mine up.
I know the stalks are all one unit and are plug in but that's as far as my knowledge goes to be fair.
Ha Just me then some Muppet must have changed it at some point no biggy
Ive had the tank punps connected wrong way around.
Is the front wiper wiping..but the water going to rear..??
that sounds like the pump wiring..
the stalk operation sounds relatively normal for a FIAT.. cannot remember what the Idea switches functions were like.
I currently drive 5 x FIAT cars.. they are ALL DIFFERENT...
where abouts do you live..?? Carmarthenshire..?
charlie - Oxford
Pushing my stalk away operates the REAR washer jet and pulling it towards me operates the FRONT washers jets and wipers.
So his is wrong somewhere.
that sounds like the pump wiring..
the stalk operation sounds relatively normal for a FIAT.. cannot remember what the Idea switches functions were like.
I currently drive 5 x FIAT cars.. they are ALL DIFFERENT...
where abouts do you live..?? Carmarthenshire..?
charlie - Oxford
I live in Pembrokeshire not far away from Carmarthenshire
I was just wondering if it would be an MOT fail
I live in Pembrokeshire not far away from Carmarthenshire
I was just wondering if it would be an MOT fail
I'll remove the black trim under the bonnet and see what's what maybe they've put the connector upside down or something into the pump motor
Any ideas about the steering to the left slightly now I've changed the n/s/f shock
Need alignment ?
Normally recommendation when changing shocks is to do them in pairs, as now you have one new shock and one old one both operating slightly differently due to age/wear. Hence why it's probably pulling to the left slightly (which I assume is the side you've changed).