im planning to install 2 subs and an amp into the boot of my punto mk 2.5 but im not sure which layout would look best. Do i put both subs in one double box and put in middle of boot? or do i put each sub in a single box and put one at each side of my boot and put the amp in the middle? any other ideas are welcome
flick

Probably best putting this in the ICE section, but hey.

IMO, a sub each side in a moulded FG enclosure with amps / eq's etc in the middle looks best.

i agree with paul on this, u could go for something like this (power caps not necessary)

this is in a mk2.5

crazy

paulbfd said:

Probably best putting this in the ICE section, but hey.

Click to expand...

click ask for thread move nicely

crazydave said:

i agree with paul on this, u could go for something like this (power caps not necessary)

this is in a mk2.5

crazy

Click to expand...

Thats a personal point of view , being enforced by the ICE gestapo the same as 6 x 9's

Steve

They do there job but in doing there job they lower the voltage over the system so therefore lower the output of the amps.

They have some uses though.

wozza said:

They do there job but in doing there job they lower the voltage over the system so therefore lower the output of the amps.

They have some uses though.

Click to expand...

Yeah, caps can be useful in some installs. However, 95% of the time, they aren't necessary. You only need to look at the competiton installs to realise this

when i did my install i made my sub box and placed it in different possitions and lay everything out around that. stilll thinking or changing it again!

thanx guys i give it sum thought. i let u know what i decide