Wired my 6x9's to my amp and im getting a feedbak from my enginge that gets higher, higher the engine revs what causes it and how am i able to resolve it?
Thanks James

What side have you run the RCA's down to the boot, presume your amps in the boot?!?
If you run them on the passabger side there is a load of wires there for the electrics of the car, this is more than likely the cause.
Solution - Run your power cable down the passanger side and the RCA's down the drivers side.

"The Not so Fast but Furious"

i'vw got them all running downt eh drives side at the moment. i will put the rca's down the drivers and power down passengers
thanks james

i have seperated the wires but still gettin feedback put the power down passengers side and speaker cabels down drivers what else could it be[?]
James

Have you got a good earth point?

hi

im having this trouble
at the mo i have power on the drivers side, and RCA on passenger side. I have got a ground isolator on the RCA lead for the 6x9's. That helps. Anyway Im having a major crack at it today, cuz drove down to cornwall and the hum got so annoying I didnt use the stereo lol.
havin the seats out, and swapping the leads over. the leads on the passenger sides, for the rear lights definately makes the situation worse.

give you an update later

joe

Seicento Sporting 2000 X
Black
Black Front and Side Indicaters
Pioneer DCEH8400 HeadUnit + JBL speakers 6x9 in parcel shelf, 10cm in front, 10" Sub and GTO4000 AMP(600Watt).
Abarth badges all round from abarthbadges.co.uk