PUMP -basics



FF 15 001.jpg

FF 15 006.jpg

FF 15 007.jpg

FF 15 008.jpg

FF 15 009.jpg

FF 15 010.jpg

FF 15 002.jpg

FF 15 004.jpg

I've used a funnel and proper filter screen for the crud-catching, but pouring through an OLD tee shirt would do the job :D


ince all clean,
reassemble grommet / seal into tank and twist pumpback into place,
re-wire the loom into place, then offer tank into car, connecting tubes as they will reack,
loosely hang tank onto car and put a little NEAT WATER into the tank, then test the pump..,
( A LOT Less work if you've made a mistake t this point)(y)
Previous page: half-way..!!