Making tool
You need
24mm ring spanner.
25x15x2mm steel
Welder and grinder.
- Next page: Fitting the belt
- Previous page: Overview
You need
24mm ring spanner.
25x15x2mm steel
Welder and grinder.
Stilo Fitting stretch Alternator belt 2.4 motor Abarth
- Author Maigretnz
- Publish date
- Updated
- Article read time 1 min read
You need
24mm ring spanner.
25x15x2mm steel
Welder and grinder.
Table of contents
Guide information
More in FIAT Cars
-
500 Fiat 500! things you should check once you get your car homeThese are the common problem areas on these cars you WILL have some of these issues!- if you...
-
Panda Changing the big breather hose (includes battery removal)The big breather hose is the thin one, from under the air box, to the base of the plastic inlet... -
Barchetta Ceiling lamp fixI had a problem with the ceiling lamp not working (no. 1 in the picture), even after checking... -
Panda Fitting and wiring foglampsGuide: Panda 169 Fitting and wiring fog lamps using accessory switch and independent relay...
-
Panda Headlamp removalTools Required Philips screwdriver Fine and standard pliers Torx bits 10mm spanner 1/4inch drive...