Bravo (Classic)/Brava Fiat 1.2 16v Stepper motor

Author m20b25
Publish date Apr 8, 2011
Article read time 1 min read

Guide Gallery Discussion

Conclusion

I hope this guide was some help, if I've missed something or need further advice please leave a comment!

: Previous page: The stepper motor

Share:

Facebook X (Twitter) Reddit Pinterest Tumblr WhatsApp Email Link

Table of contents

Overview The stepper motor Conclusion View full guide

Guide information

Author: m20b25

Views: 14,901

Join the discussion

More in FIAT Cars

S

500 Fiat 500! things you should check once you get your car home
These are the common problem areas on these cars you WILL have some of these issues!- if you...
Panda Changing the big breather hose (includes battery removal)
The big breather hose is the thin one, from under the air box, to the base of the plastic inlet...
Barchetta Ceiling lamp fix
I had a problem with the ceiling lamp not working (no. 1 in the picture), even after checking...
Panda Fitting and wiring foglamps
Guide: Panda 169 Fitting and wiring fog lamps using accessory switch and independent relay...
Panda Headlamp removal
Tools Required Philips screwdriver Fine and standard pliers Torx bits 10mm spanner 1/4inch drive...

More from m20b25

Bravo (Classic)/Brava Bravo front and rear disk conversions (except HGT)
This guide is intended for cars using 257mm 12mm solid discs and drums. Set some time for the...
Bravo (Classic)/Brava Alfa 146 Handbrake conversion
I found that the handbrake in my Bravo was pretty poor so after some trial and error, I found...
Bravo (Classic)/Brava Lock Mechanism/ Door handle Change
Are they serious? Theres a lot more to it than that. I hope this guide helps out anyone in...

Share this article page

Facebook X (Twitter) Reddit Pinterest Tumblr WhatsApp Email Link

Copy URL BB code

Copy AMS BB code