Recalibration-



  • Idle is at about 1000rpm (bit below) for the 1108cc
  • Speedo – Time a 1 min run at an indicated 60mph and compare this to the actual distance travelled to find the actual speed
  • Fuel guage – Fill the tank
  • Temp guage – Fan comes on about 90-100 deg C

  • All gauges except the speedo can be altered by lightly twisting the needle past the maximum points of the meter. The speedo CANNOT be calibrated this way – I snapped the internal restoring spring in this way, so now it reads 5-10mph lower. You will have to take off and replace the needle in different positions to calibrate it.

Just be careful out there, it looks easy but is fairly easy to screw it up properly!!



thanks to Tom (AofB)
Previous page: time to go to the PC