Guides by mahol

First you will need a screwdriver, i preferred to use a knife (table knife so it wasn't sharpe) and prize the vent out start from the window side and work you way round gentlely pull from the lip inside the vent or the moving part but this could be more risky if you pull to hard. i also went...

Thought i would upload the instructions on how to fit the Abarth Front Bumper just in case anyone needs them:thumb: enjoy, hope it helps someone

Im writing this as i do this project. so don't worry if its not complete. I got some front door handles from a scrap yard (mine were removed from a 5DR model both model the same shape, size etc so doesn't really matter) or you can remove the inside panel (which is described in detail in a few...