Guides by evol1

Punto (Mk1) Painting your handles
evol1
Updated
Views
8,812
first of all clean and sand down the handles with wet/dry sand paper, ensure it is wet tho for a better finish. now cover the surrounding area and then cover the handle with 3 coats of primer now paint the handle with 3 coats of colour paint, then lac the handle then its complete hey...
evol1
Updated
Views
7,629
first clean the plastic down then using wet/dry sand paper, rub the plastic down LOOOOOADS, make sure you use the paper wet tho, better finish then tape the surrounding area to stop paint getting else where o nthe car, use more then i have tho, i managed to cover my bumper! :mad: then prime...
Punto (Mk1) Change side repeaters
evol1
Updated
Views
10,471
open the door and slip your hand in the gap and push the light out JUST POPS OUT as so replace the white bulb with the orange one push the light+cables bk inside the new white case and push it back onto the side of the car hey presto by :worship: :worship: evol1:worship: :worship:
evol1
Updated
Views
6,255
this is what your car will look like with the horrible standard indicators simply pop the bonnet open then lift pull the wire ring inside away from the frame then pull the indicator out then twist the wires with the bulb out of the case and twist them back into the new ones pull the...
evol1
Updated
Views
9,806
i hated my black bumpers and want my s 60 to look like a sporting/gt:D and so i took it off, heres how Tools: socket wrench screw driver First you need to open your bonnet and find all the bolts holding the front bumper on. theres some on the top and then you need to remove the inside of the...
Punto (Mk1) Gear knob removal
evol1
Updated
Views
35,160
Punto mk1 gear knobs are really hard work to remove, so heres how to do it the easy(ish) way. tools: sharp stanley knife grips first you need to cut the rubber handle off Then you need to pull it off snapping the little rubber spines attaching it to the plastic ball now get your grips...
Top